À¯·®°è Àü¹®»çÀÌÆ® ³ëÁ¡°è Àü¹®»çÀÌÆ®
Boards Home > Daughter Boards & Accessories - DB-24SSR
24-channel solid state relay output board


» Features

¡á 24 Form A solid-state relays
¡á Switch up to 4A at 250VAC
¡á 5VDC logic levels
¡á 2,500V optical isolation
¡á LEDs indicate relay status
¡á Screw terminal for easy field wiring
¡á Plug-in screw-terminal blocks,ensuring simple installation,
   modification and maintenance
» Functional Description

  The DB-24SSR includes 24 normally open, Form A, solid- state relays. The board acts as an interface to field logic signals and can eliminate ground-loop problems and isolate the host computer from damaging voltages. The user can use the DB-24SSR to switch high voltage load which can be up to 250VAC and up to 4 A. The relay is energized by appling a 5 volt signal to the appropriate relay channel via a 50-pin OPTO-22 compatible connector or a 37-pin D-Sub connective. Twenty-four enunicator LEDs, one for each relay, light when their associated relays are activated.

» Specifications

  Solid State Relay Output
¡Ü Load voltage : 50~250VAC
¡Ü Repetitive peak OFF voltage : 600V
¡Ü Surge current : 50 A
¡Ü Max. load current : 4 A
¡Ü Min. load current : 20 mA
¡Ü Max. "OFF-state" leakage current : 50 mA
¡Ü Operate time : 1/2 cycle of voltage sine wave 1 ms max (Zero-cross)

  General Specifications
¡Ü Power Requirements : 5V@0.4A max
¡Ü Operating temperature : 0¡ÆC ~ 60¡ÆC
¡Ü Operating humidity : 0% ~ 90% non-condensing
¡Ü Storage temperature : -20¡ÆC ~ 80¡ÆC
¡Ü Dimensions : 130 mm x 220 mm

Ordering Information

 Standard
DB-24SSR : 24-channel OPTO-22 solid state relay output board with CA-5015 cable
DB-24SSR/DIN : DB-24SSR with DIN-rail mounting kit
DB-24SSR/D : 24-channel OPTO-22 solid state relay output board with CA-3710 cable
DB-24SSR/D/DIN : DB-24SSR/D with DIN-rail mounting kit
DB-12SSR : 12-channel OPTO-22 solid state relay output board with CA-5015 cable
DB-12SSR/DIN : DB-12SSR with DIN-rail mounting kit
DB-12SSR/D : 12-channel OPTO-22 solid state relay output board with CA-3710 cable
DB-12SSR/D/DIN : DB-12SSR/D with DIN-rail mounting kit

 Optional
CA-3720 : 37-pin D-sub cable, 2m