Boards Home > CAN Communication Boards PISO-CAN400-D/400-T
Isolated 4-port CAN bus communication board
» Features
■ Four independent CAN bus 2.0A/2.0B communication ports
■ Compatible with CAN specification 2.0 parts A and B
■ On-board optical isolators protection
■ Programmable transfer rate up to 1 Mbps
■ Jumper-selected 120Ω terminator resistor for each port
■ Direct memory mapping to the CAN controllers
■ 33MHz 32-bit 5V PCI bus (V2.1) plug and play
» Functional Description
The CAN (Controller Area Network) is a serial communication network and efficiently supports distributed real-time control with a very high level of security.
It is especially suited for networking "intelligent" devices, sensors, and actuators within a system or sub-system. In CAN networks, there is no addressing of subscribers or stations in the conventional sense, but the prioritized messages are transmitted instead.
As a standalone CAN controller, PISO-CAN400 is an active CAN board with two and four independent CAN bus communication ports which is equipped with 5-pin screw terminal connector or 9-pin D-sub connector.
It covers a wide range of CAN applications and is economic. Besides, PISO-CAN400 uses the new Phillips SJA1000T controller and 82C250/251 transceiver to provide bus arbitration and error detection with auto correction and re-transmission function.
It can be installed in a 5V PCI slot and support truly "Plug & Play".
» Applications
● DeviceNet, CANopen, CAN J1939, SDS (System Wide Network) protocol application
● CAN bus communication application
● Industry automation
● Semiconductor fabrication application
● Building automation
● Industrial machine control
● High-speed assembly application
» Specifications
● CAN controller : Phillip SJA1000T
● CAN transceiver : Phillip 82C250/251
● Signal support : CAN_H, CAN_L
● 16 MHz CAN controller frequency
● Connector : 5-pin screw terminal connector or 9-pin D- sub connector
● Isolation voltage : 2500Vrms
General Specifications
● Operating temperature : 0°C ~ 60°C
● Operating humidity : 10 ~ 90% non-condensing
● Storage temperature : -20°C ~ 70°C
● Storage humidity : 5 ~ 95% non-condensing
● Dimensions : 130 mm x 110 mm
» Ordering Information PISO-CAN400-D : Isolated 4-port CAN bus communication
board with 9-pin D-sub connecto PISO-CAN400-T : Isolated 4-port CAN bus communication
board with 5-pin screw terminal connector
