Boards Home > Motion Control & Watcdog Boards-PISO-ENC300/600
3-axis high speed stepping/servo control board
» Features
■ 32-bit +5V PCI bus, Plug & Play
■ 3/6-axis encoder counter
■ True 32-bit counter
■ Maximum counting rate : 1MHz
■ Third-order internal digital filter
■ Counting mode : Quadrant, CW_CCW and PULSE_DIR
■ A+, A-, B+, B-, C+, C- inputs
■ Programmable register reset counter function
■ Index (C channel) reset counter function
■ Hardware reset (HR1~HR6) counter function
■ 8 digital outputs
■ 2500V optical isolation
■ 2500Vrms optical isolation
» Functional Description
The PISO-ENC300/600 has a 3/6-axis encoder input counter and each axis has a 32-bit true counter with maximum counting rate of 1MHz.
The counting mode has 3 types of selections: QUADRANT mode, CW_CCW mode, PULSE_DIR mode.
The PISO-ENC600 provides 3 kinds of counter reset mode :
1. register reset, 2.index reset, 3. hardware reset. In index reset mode, the Encoder counter will be reset by C+/C-channel input.
In hardware reset mode, the Encoder counter will be reset by an external pin (HR1~HR6). The HR1~HR6 also can be used as a digital inputs.
The PISO-ENC600 also provides 8-channel digital outputs.
» Connection between Encoder and ICPDAS Motion Control Card
» Connection between Open-Connector Encoder and ICPDAS Motion Control Card
General Specifications
● I/O connector : one 68-pin SCSI-Ⅱ female
● Power requirements : +5V @ 500 mA (typical)
● Operating temperature : 0°C ~ 60°C
● Operating humidity : 0% ~ 90% non-condensing
● Storage temperature : -20°C ~ 70°C
● Dimensions : 157mm x 106mm
){kind=small}
Pin View
