굿모닝계측기 I-7000 Series Analog Input Modules I-7011PD

Home > I-7000 Series Analog Input Modules

Manual	PIN Assignment
Internal I/O Structure	Wire Connection

» Analog Input
● Photo-isolation : 3750 Vrms
● Type : mV, V , mA (requires optional external 125 ohm resistor)
● Thermocouple : Type J, K, T, E, R, S, B, N, C, L, M
● Channels : 1
● Voltage range : +/-15mV, +/-50mV, +/-100mV, +/- 500mV,
+/-1V, +/- 2.5V
● Current range : +/- 20mA
● Resolution : 16-bit
● Sampling rate : 10 Samples/Second
● Bandwidth : 5.24 Hz
● Input impedance : 20M ohms
● Accuracy : ±0.05%
● Zero Drift : ± 0.5uV/℃
● Span Drift : 25ppm/℃
● CMR @ 50/60 Hz : 150 dB
● NMR @ 50/60 Hz : 100 dB
● Over voltage protection : 35V (P-P)
● Isolation : 3000Vrms

Thermocouple type : (C)
Type	Range (℃)
J	-210 ~ +760
K	-270 ~ +1372
T	-270 ~ +400
E	-270 ~ +1000
R	0 ~ +1768
S	0 ~ +1768
B	0 ~ +1820
N	-270 ~ 1300
C	0 ~ 2320
L	-200 ~ 800
M	-200 ~ 100

» Digital Input
● Channel : 1
● Logic Level 0 : + 1V max
● Logic Level 1 : + 3.5V to 30V

» Event Counter
● Max Input Frequency : 50Hz
● Min. Pulse Width : 1 mS

» Digital Output
● Channels : 2
● Open collector to 30V
● Output Load : sink 30mA max.
● Power dissipation : 300mW

» Display LED
● 4 1/2 digits (for I-7011PD)

» Communication Interface
● RS-485

» Power Supply
● Input : +10 to +30 Vdc
● Consumption : 0.9W for I-7011P
1.5W for I-7011PD

» Ordering Information

I-7011P	Thermocouple Input Module
I-7011PD	Thermocouple Input Module with LED Display

» Suggested Accessory

I-7520

I-7520 series converter for configuration or connection to PC