제품 상세보기

XP-8x38-CE6 시리즈

제품명
XP-8x38-CE6 시리즈
용도
XP-8000 시리즈
특성
Windows CE6 R3 Core 내장, Win-GRAF
제조사
ICPDAS(대만)

XP-8000-CE6 시리즈  (Win-GRAF based)
XP-8038-CE6, XP-8138-CE6, XP-8338-CE6, XP-8738-CE6    

 

       

 

  • x86 CPU, 1.0GHz, 듀얼 코어
  • Windows CE 6.0
  • 임베디드 Win-GRAF SoftLogic (IEC 61131-3)
  • 하드 리얼 타임 기능
  • VGA 포트 출력
  • Modbus RTU / TCP (마스터, 슬레이브)
  • eLogger HMI 지원
  • 듀얼 PAC 이중화 시스템 지원
  • 이중 전원 입력
  • 작동 온도 : -25 ~ +75 ° C

 

 

Win-GRAF XPAC-8000-CE6 시리즈 (XP-8038-CE6 / XP-8138-CE6 / XP-8338-CE6 / XP-8738-CE6) 는 차세대 WinCE 6.0 기반 Win-GRAF XPAC- 자동화 컨트롤러)를 ICP DAS에서 분리합니다. 각 제품에는 Windows CE 6.0 운영 체제, 다양한 입 / 출력 포트 (VGA, USB, 이더넷, RS-232 / 485) 및 I / O 범위를 실행하는 x86 CPU (1GHz) 듀얼 코어가 장착되어 있습니다. 고성능 병렬 I / O 모듈 (하이 프로파일 I-8K 시리즈) 또는 직렬 I / O 모듈 (하이 프로파일 I-87K 시리즈)을 통합하는 데 사용할 수있는 슬롯 (0/1/3/7)

XPAC 장치에서 Windows CE 6.0을 실행하면 얻을 수있는 이점으로는 하드 실시간 기능, 달성 가능한 결정 제어 및 허용 PAC가 PC와 유사한 창 표시 및 운영 환경을 가질 수 있습니다. PAC는 로직 제어 애플리케이션을 개발하기 위해 Win-GRAF (IEC 61131-3 Standard) 소프트웨어를 실행할 수 있으며 Win VS 2008 소프트웨어 (VB .NET, C #)를 지원하여 Win과 데이터를 교환 할 수있는 HMI 및 데이터 관리 애플리케이션을 개발할 수 있습니다 -GRAF 응용 프로그램. 따라서 응용 프로그램의 디자인이보다 편리하고 실용적입니다.

 

 

Win-GRAF 는 강력한 PLC와 유사한 소프트 로직 개발 소프트웨어입니다. Windows 7 또는 8이 설치된 PC에 설치됩니다. IEC 61131-3 - 래더 다이어그램 (LD), FBD (Function Block Diagram), SFC (Sequential Function Chart), ST (Structured Text) ICP DAS의 모든 Win-GRAF PAC 용 응용 프로그램을 개발하는 데 적합한 Instruction Set (IL).

 

IEC 61131-3 표준 개방형 PLC 구문 (LD, FBD, SFC, ST, IL)

FBD 또는 LD 프로그램에서 ST 구문 사용

이벤트 트리거 된 데이터 바인딩 (PAC 간의 Exchange 데이터)

온라인 디버깅 / 제어 / 모니터링, 오프라인 시뮬레이션

온 라인 변경

다양한 프로토콜 :

- Modbus TCP / UDP, Modbus RTU / ASCII 마스터 

- Modbus TCP, RTU 슬레이브

- DCON ...

풍부한 기능, 펑션 블록, I / O 보드

리던던시 (XP-8x38-CE6 PAC 전용)

 

 

 

Note: Except for specially noted items, all applications are applicable to the Win-GRAF PAC (i.e., WP-8xx8, WP-5xx8-CE7,
           WP-8xx8-CE7, WP-9xx8-CE7, VP-x2x8-CE7, XP-8x38-CE6 PAC).
  Redundant System    Schedule Control 
For XP-8x38-CE6 PAC only.
Only CPU is Redundant
Both CPU and I/O Modules are Redundant
  On Line Change   Modbus Master Ports 
Replace the current running project to a new modified one 
   without stopping the project.
 


 
  eLogger HMI  Modbus RTU/TCP Slave Ports 


 
  Event Triggered Data Binding   DCON Remote I/O 
Exchange data between PACs.
  Intelligent Win-GRAF 3G Solution   
Only the WG-Communication Server (behavior like a Cloud Server) needs a public IP (support Domain Name). 
   Other PACs and PCs that connect to this Server no need a public IP.
The user can monitor the remote PAC by using a 3G wireless network or an intranet.
The user can use the Win-GRAF Workbench to connect to a remote PAC to debug/update the Win-GRAF program or 
   update the Win-GRAF PAC Driver.
The PAC can actively send a Log File to a PC (WG-Communication-Server).

  Support VS 2008 Development   
The Win-GRAF PACs support to use VS 2008 (VB.net, C#) to develop user own HMI and data management 
   programs, and can exchange variables with the Win-GRAF control programs.

 
  Create Your Own Functions and Function Blocks 
For some reason (like business protection, integration with your own product protocol, and etc.), you can develop your
   own functions and function blocks by VS 2008. Then, you can use these functions and function blocks in
   the Win-GRAF project.

  PID Control
Can Control more than 200 PID in one PAC.

 

 

Models XP-8038-CE6 XP-8138-CE6 XP-8338-CE6 XP-8738-CE6
System Software
OS Windows CE 6.0
.Net Compact Framework 3.5
Embedded Service FTP Server, ASP (Java Script, VB Script), SQL Compact Edition 3.5
SDK Provided Dll for Visual Studio .Net 2005/2008
Multilanguage Support English, German, French, Spanish, Russian, Italian, Japanese, Simplified Chinese, Traditional Chinese
Development Software
Win-GRAF
Software
Win-GRAF IEC 61131-3 standard
Languages LD, ST, FBD, SFC, IL
Max. Code Size 2 MB
Scan Time 3 ~ 15 ms for normal program
15 ~ 50 ms (or more) for complex or large program
Non-Win-GRAF Options: VS.NET 2008 (VB.NET, C#.NET, C)
CPU Module
CPU x86 CPU, 1.0 GHz, dual-core
System Memory 2 GB DDR3
Non-volatile Memory, MRAM 512 KB (retain memory without battery support)
Flash 32 GB
EEPROM 16 KB (Data Retention: 40 years; 1,000,000 erase/write cycles)
CF Card 8 GB (support up to 32 GB)
RTC (Real Time Clock) Provide second, minute, hour, date, day of week, month, year
Programmable LED Indicator 2
64-bit Hardware Serial Number Yes, for Software Copy Protection
Dual Watchdog Timers Yes
Rotary Switch Yes (0 ~ 9)
DIP Switch - Yes (8 bits)
Audio Microphone-In and Earphone-Out
VGA & Communication Ports
VGA Yes, (resolution: 1024 x 768, 800 x 600, 640 x480)
Ethernet RJ-45 x 2, 10/100/1000 Base-T (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
USB 2.0 4
COM 1 RS-232 (RxD, TxD and GND); non-isolated Internal communication with the high profile I-87K series modules in slots
COM 2 RS-232 (RxD, TxD and GND); non-isolated
COM 3 RS-485 D2+, D2-; self-tuner ASIC inside
Isolation 3000 VDC
COM 4 RS-232/RS-485 (RxD, TxD, CTS, RTS and GND for RS-232, Data+ and Data- for RS-485); 
non-isolated
COM 5 RS-232 (RxD, TxD, CTS, RTS, DSR, DTR, CD, RI and GND); non-isolated
I/O Expansion Slots
Slot Number 0 1 3 7
Note: For High Profile I-8K and I-87K Modules Only
Mechanical
Dimensions (W x L x H) 137 x 132 x 125 mm 169 x 132 x 125 mm 231 x 132 x 125 mm 355 x 132 x 125 mm
Installation DIN-Rail or Wall Mounting
Environmental
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +80°C
Ambient Relative Humidity 10 ~ 90% RH (non-condensing)
Power
Input Range +10 ~ +30 VDc
Isolation 1 kV
Redundant Power Inputs Yes, with one power relay (1 A @ 24 VDC) for alarm
Capacity 20 W 20 W 35 W 35 W
Consumption 12 W 
(0.5 A @ 24 VDC)
16.6 W 
(0.69 A @ 24 VDC)
16.8 W 
(0.7 A @ 24 VDC)
18 W 
(0.75 A @ 24 VDC)

 

 

Protocols (Note that certain protocols require optional devices)
NET ID 1 ~ 255, for Modbus TCP/RTU Slave, user-assigned.
Modbus TCP Master A max. of 200 IP links to access/control the devices supporting Standard Modbus TCP Slave protocol.
Modbus RTU/ASCII Master A max. of 32 ports: COM1 ~ 33 (*) to connect other Modbus Slave devices(Like M-7000).
Recommend connecting no more than 32 devices in each port for better scan rate.
Modbus RTU Slave A max. of 16 ports: COM1 ~ 33 (*) for connecting SCADA/HMI/OPC Server.
Modbus TCP Slave Two Ethernet ports (LAN1 & LAN2) support up to 64 connections. If the PAC uses 1 connection to connect each PC/HMI, it can connect up to 64 PCs/HMIs; If the PAC uses 2 connections to connect each PC/HMI, it can connect up to 32 PCs/HMIs; If one of the Ethernet port malfunctions, the other one can still be used to connect the PC/HMI.
User-defined Protocol Custom protocols can be applied at COM1 ~ 33 (*) by using Serial communication functions or function blocks.
DCON Remote I/O A max. of 16 RS-485 ports: COM1 ~ 33 (*). Each port can connect max. 50 nos I-7000 series modules or 50 nos I-87xxxW I/O modules in expansion units (I-87K4, I-87K8, I-87K9, RU-87P8, RU-87P4). Recommend connecting no more than 32 modules in each port for better scan rate.
Local I/O Modules Supports only high profile I/O modules. Slot 1 ~ 7 supports I-8xxxW parallel I/O modules and I-87xxxW serial I/O modules. (Refer Optional I/O List)
App Protection Using the unique 64-bit (8 bytes) PAC serial number to generate a protection password by your own algorithm to protect your Win-GRAF application. Then, if someone intend to copy your application in the PAC to another new PAC with the same PAC model, this application will not work properly in that new PAC.
Redundancy 2 XP-8x38-CE6 can set a redundant system, when one is damaged or crashes, the other can still take up and continue the work. The system offers 3-line communication redundancy, LAN1, LAN2 and Alive Port (COM5), as long as one of the three communication lines still connects normally, this redundant system can normally control the process. The redundant system provides a public IP address that allows SCADA/ HMI software to access it without needing to determine which one is the Active IP.
Data Binding Exchange data between ICP DAS Win-GRAF PAC via Ethernet ports (LAN1 and LAN2). The data transmission is event triggered. It is much efficient than polling way. Beside, user can setup the Redundant Binding in two ethernet ports by Software, then if one Ethernet port fail, it can switch to use the other port.
On Line Change For application field that not allowed to stop the Win-GRAF program and wish to run a new program modified a little from the original program.
Modbus RTU I/O When software enables Modbus RTU Master function, the PAC can connect ICP DAS M-7000 and tM series and LC series I/O modules which support Modbus RTU protocol.
Modbus TCP I/O When software enable Modbus TCP Master function, the PAC can connect ICP DAS I-8KE4/8-MTCP, PETL-7000, tPET/tET series I/O modules which support Modbus TCP protocol.
HART Master Support I-87H17W modules in slot 1 to 7 to communicate with other HART devices.
Schedule Control Supports the "Schedule-Control Utility" (free) to implement schedule control. Each PAC can control max. 10 Targets (devices) with different schedule settings in each day / holiday / special day / season / year.
Retain Variables Built-in the fast retain memory that can retain up to 12,000 Win-GRAF variables.
File Access and Data Log The Win-GRAF supports file operation functions to read/write files in the PAC's micro_SD or flash memory to do data log or file access.
eLogger HMI Support to run HMI program (developed by the eLogger) together with the Win-GRAF logic-control program in the same PAC.
Optional I/O List (Go to I-8K, I-87k Selection Guide)
Digital Input (DI) I-8040W, I-8040PW, I-8046W, I-8051W, I-8052W, I-8053W, I-8053PW, I-87040W, I-87040PW, 
I-87046W, I-87051W, I-87052W, I-87053W, I-87053PW, I-87053W-A2, I-87053W-A5, I-87053W-E5
Digital Input/Output (DIO) I-8042W, I-8050W, I-8054W, I-8055W, I-87042W, I-87054W, I-87055W
Digital Output (DO) I-8037W, I-8041W, I-8041AW, I-8056W, I-8057W, I-87037W, I-87041W, I-87057W, I-87057PW
Relay Output I-8060W, I-8063W, I-8064W, I-8068W, I-8069W, I-87061W, I-87061PW, I-87063W, I-87064W,
I-87065W, I-87066W, I-87068W, I-87068W-2A, I-87069W, I-87069PW
AC Input I-8058W, I-87053W-AC1, I-87058W, I-87059W
Analog Input (AI) I-8017DW, I-8017HW, I-8017HCW, I-87017W, I-87017RW, I-87017RCW, I-87017DW, I-87017W-A5, 
I-87017ZW, I-87018W, I-87018RW, I-87018PW, I-87018ZW, I-87019PW, I-87019RW, I-87019ZW
Analog Output (AO) I-8024W, I-87024CW, I-87024UW, I-87024DW, I-87024RW, I-87024W, I-87028CW, I-87028UW,
I-87028VW, I-87028VW-20V
Multifunction (DIO, AIO) I-87026W
Temperature
Input
Thermistor I-87005W
RTD -87013W, I-87015W, I-87015PW
T/C I-87018W, I-87018RW, I-87018PW, I-87018ZW, I-87019PW, I-87019RW, I-87019ZW
Strain Gauge I-87016W
Counter/Frequency Input I-8084W, I-87082W, I-87084W
Encoder Input I-8093W
PWM Output I-8088W
HART I-87H17W
GPS GPS-721
Communication Module I-8112iW, I-8114W, I-8114iW, I-8142iW, I-8144iW
Temperature & Humidity Input DL-100T485, DL-100T485-W, DL-100T485P, DL-100T485P-W (DCON Protocol)
DL-100TM485, DL-100TM485-W, DL-100TM485P, DL-100TM485P-W (Modbus RTU Protocol)
* Note: COM6 ~ COM33 ports are located in the expansion boards (I-8142iW, I-8144iW, I-8112iW, I-8114W, I-8114iW)
             if they are installed in slot 1 ~ 7 of XP-8x38-CE6.
* The COM1 port on XP-8038-CE6 is RS-232; 
   COM1 on other Win-GRAF XPAC is for internal communication with I-87K modules installed in slots only.

* ICP DAS recommends using NS-205/NS-208 or RS-405/408 (Ring Switch) Industrial Ethernet Switches.

 

 

XP-8038-CE6 CR 0 I/O 슬롯 WinCE 6.0 기반 Win-GRAF XPAC (OS : 다국어 버전) (RoHS)
XP-8138-CE6 CR 1개의 I/O 슬롯 WinCE 6.0 기반 Win-GRAF XPAC (OS : 다국어 버전) (RoHS)
XP-8338-CE6 CR 3 개의 I/O 슬롯 WinCE 6.0 기반 Win-GRAF XPAC (OS : 다국어 버전) (RoHS)
XP-8738-CE6 CR 7 개의 I/O 슬롯 WinCE 6.0 기반 Win-GRAF XPAC (OS : 다국어 버전) (RoHS)
XPCE6-GUP-18000 Win-GRAF를 지원하기 위해 XP-8x31-CE6을 XP-8x38-CE6으로 업그레이드하십시오.

 

 

Win-GRAF 개발 소프트웨어
Win-GRAF Workbench Win-GRAF Workbench Software (Large I/O Tags) with one USB Dongle

 

관련 상품
  • 관련 상품이 없습니다.