LC/SC/DALI 시리즈 : Smart Lighting Control

The smart lighting products, are generally designed for building automation, easy cabling, installation and setup. The LC and SC series support Modbus and DCON protocols; the DALI series is a DALI converter. According to the demands, user can control lighting with digital input directly or via RS-485 communication.  The main applications are the group lighting control, dimmer scenes, electric curtains, HVAC, security and other automation controls. Customers can build a smart home/building automation system combine with the Hub and TouchPAD module.

Features

► Modbus RTU 및 DCON 통신 프로토콜 지원

타사 장치를 쉽게 통합할 수 있도록 업계 표준 Modbus 프로토콜 및 DCON 문자열 프로토콜을 지원합니다.

► 디지털 입력 및 RS-485 통신으로 제어

Provide two methods to control the Relay output:  directly from the digital input, or via the RS-485 communication, or both.

ICP DAS's iWSN series modules can assist customers in various related applications of the Industry 4.0 trend to meet the needs of monitoring equipment current, fault diagnosis, preventive maintenance, etc., such as: power panel current and temperature monitoring, factory environment environmental humidity and gas monitoring , motor vibration detection, etc., not only has the advantages of rapid deployment, but also can reduce the cost of deployment and maintenance, help production line equipment maintenance and avoid industrial safety accidents.

LC 시리즈 : Lighting Control 모듈

Lighting Control / Dimmer Control

LC-103H is an easy-to-use lighting control module that requires no special skills to install and operate, and no software is needed in order to control the DO channels. The auto-control and traditional real switches can coexist through this perfect solution to incorporate traditional switches into advanced automation control.

LC-223H provides two-stage brightness for dimmer control.
When no one enters the detection range, the lamp will remain at the 10% brightness.

When people enters, the lights will switch to the brightness range from 10% to 100%.
When people leave the area, the fixtures will return back to default 10% brightness.

LC-322H is a 2-ch relay output loop with load current measurement module that provides the total current of all lamps on the control loop circuit and can use the relay to turn ON/OFF the current loop. In the lighting control application, the value of the load current feedback can help to know whether the equipment on the loop circuit is working well or fail, whether the ageing equipment needs to replace a new one, whether the relay is still sticky on, and so on.

DALI 시리즈

DALI Gateway

DGW-521 is a communication gateway between the Modbus RTU/DCON and the DALI (Digital Addressable Lighting Interface) protocols, and allows a Host PC, PAC, or TouchPAD to access DALI devices by providing three interfaces that enable conversion from RS-232/RS-485/USB to DALI. The module provides a built-in DALI power supply that can be enabled or disabled via a switch. DALI is an international standard for lighting control interfaces, and is suitable for DALI lighting systems covering small areas. The maximum length of the DALI signal cables cannot exceed 300 m.

Selection Guide