제품 상세보기
;)
;)
I-7188-MTCP/uPAC-7186EX-MTCP
- 제품명
- I-7188-MTCP/uPAC-7186EX-MTCP
- 용도
- 선택가이드
- 특성
- Modbus gateway
- 제조사
- ICPDAS (대만)
|
uPAC-7186E series Programmable Modbus Gateway
The uPAC-7186E-MTCP is our new generation of palm-size Programmable Modbus Gateway. It equips a more power full CPU (upgraded from 40M Hz to 80M Hz) and a faster Ethernet port (upgraded from 10 Base-T to 10/100 Base-TX). Compared with I-7188E-MTCP series, uPAC-7186E’s computing speed is up to 4 times faster. And there are more memory configuration choices to select from. |
||||||||||
| Model | CPU | SRAM | Flash | EEPROM | Ethernet Port | RS-232/RS-485 | I/O Expansion | 7 Segment Display | PoE | |
|---|---|---|---|---|---|---|---|---|---|---|
| uPAC-7186EX-MTCP | 80186, 80 MHz | 512 KB | 512 KB | 16 KB | 1 | 2 | X-board (Note) | - | - | |
| uPAC-7186EXD-MTCP | Y | |||||||||
| uPAC-7186PEX-MTCP | - | Y | ||||||||
| uPAC-7186PEXD-MTCP | Y | |||||||||
| Note: The I/O Expansion Bus can mount one X-board only. | ||||||||||
|
7188E series Programmable Modbus Gateway
The palm-size PAC all has the same form factor and system architecture. With different firmware and communication interface, they can be a gateway to transmite data to another media or translate to different protocol. |
||||||||||
| Model | CPU | SRAM | Flash | EEPROM | SN | RTC | Ethernet Port |
RS-232/ RS-485 |
I/O Expansion | |
|---|---|---|---|---|---|---|---|---|---|---|
| I-7188EX-MTCP | 80188, 40 MHz | 512 KB | 512 KB | 2 KB | 64-bit Hardware serial number | Yes | 10 Base-T | 1/1 | X-board (Note) | |
| I-7188EXD-MTCP | ||||||||||
| I-7188E2-MTCP | 384 KB | - | - | - | ||||||
| I-7188E2D-MTCP | ||||||||||
| Note: The I/O Expansion Bus can mount one X-board only. | ||||||||||
Most uPAC-7186 and I-7188 series have a built-in expansion bus.
X-board can be plugged on the Bus to expand I/O channels, COM Ports, memories or hardware functions.
For more information, please go to the following web page.
Remote I/O Selection
Ethernet
The available Ethernet I/O devices are ET-7000, ET-7200, ET-87P4/8-MTCP and I-8KE4/8-MTCP. The PAC can access them in Modbus/TCP protocol. A nModbus.dll is provided for C#, VB.net programming.
RS-485
The PACs are equipped with the RS485 COM ports which enable the transmission rate up to a maximum of 115.2 Kbps. The medium for connection is a twisted-pair, multi-drop, 2-wire RS-485 network that can link I-7000, M-7000, RU-87Pn with high profile I-87K modules. To access M-7000, a nModbus.dll is provided for C#, VB.net programming. To access I-7000 and RU-87Pn with high profile I-87K modules, PACSDK is provided for C#, VB.net, VC and VB programming.
FRnet
FRnet is an innovative industrial field bus that has many special features, such as high-speed deterministic I/O control, real I/O synchronization capabilities, non-protocol communication, and easy programming. With a FRnet communication module (I-8172W), the PAC can link FRnet I/O modules to implement high-speed distributed I/O (FR-2000 series). To access I-8172W, a pac_i8172w.dll is provided for C#, VB.net, VC and VB programming.
FR-2000
CAN Bus
The Controller Area Network (CAN) is a serial communication way, which efficiently supports distributed real-time control with a very high level of security. It provides the error-processing mechanisms and concepts of message priority. These features can improve the network reliability and transmission efficiency. Furthermore, CAN supplies the multi-master capabilities, and is especially suited for networking“intelligent” devices as well as sensors and actuators within a system or a sub-system. With I-8123, I-8124, I-87120, the PAC is able to demonstrate every feature of CAN, CANopen, and DeviceNet.
CAN Bus
관련 상품
- 관련 상품이 없습니다.
